Rational Combi-Duo Universal Manual De Instalación página 15

6 | Remote control
Turn the door handle of the bottom unit
1. Disassemble the door handle of the
bottom unit: Remove the plastic cover
of the door lock on the inner side of
the door, by sliding the cover towards
the inner side of the door and taking it
out [ Photo
2. Loosen the screws of the door handle
with a 5 mm Allen key [
3. Pull the door handle off, turn it 180
degrees and reattach the door handle
[ Photo 17].
4. Apply the plastic cover [
6 Remote control
With the Combi-Duo tower, you have the
option of connecting the two units to-
gether.
NOTICE
The remote control setting must be
carried out on the controlling unit
In order for the remote control function
to work, the following steps must be
set on the controlling unit.
The controlling unit and the unit to be
controlled must be defined in advance.
a
The units are connected with an Ether-
net cable.
a
Both units are switched on and ready
for use.
1. Click the display text (pos. 1) Configur-
ation [
Photo
2. Click the display text (pos. 2) Cooking
system [
Photo
3. Click the display text (pos. 1) Remote
control [
Photo
80.51.378_iCombiPro-iCombiClassic_CD-U_IM_EU-west
15].
Photo 16].
Photo
19].
19].
20].
>
The remote control menu is open.
You can carry out the configura-
tion.
4. Click the display text (pos. 2) Unit
name [
>
Enter a unique unit name.
5. Click the display text (pos. 3) Unit col-
our [
>
Select the unit colour.
6. Set the remote control button to (pos.
4) ON [
18]. 7. Click the display text (pos. 5) IP ad-
dress of remote controlled unit
[ Photo
>
Enter the IP address of the iCombi
to be controlled remotely.
>>
The units are connected together.
Important: You can switch between the
units (pos. 6) [
When the controlling unit accesses the
unit to be controlled, the display is framed
in the selected colour (see step 5). This
shows that settings are now being carried
out on another unit.
Photo 20].
Photo 20].
Photo 20] .
20].
Photo 20].
English
15 / 96