Publicidad
Idiomas disponibles
Idiomas disponibles
IEC62368 standard. Please refer to technical
specifications for detailed information.
● Make sure the plug is properly connected to the
power socket.
● The socket-outlet shall be installed near the
equipment and shall be easily accessible.
● DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
● DO NOT touch the bare metal contacts of the
inlets after the circuit breaker is turned off.
Electricity still exists.
● + identifies the positive terminal(s) of equipment
which is used with, or generates direct current. -
identifies the negative terminal(s) of equipment
which is used with, or generates direct current.
Battery
● Risk of explosion if the battery is replaced by an
incorrect type. Dispose of used batteries
according to the instructions. Il y a risque
d'explosion si la batterie est remplacée par une
batterie de type incorrect. Mettre au rebut les
batteries usagées conformément aux
instructions.
● The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
● For long-term storage of the battery, make sure it
is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
● This equipment is not suitable for use in locations
where children are likely to be present.
● Improper replacement of the battery with an
incorrect type may defeat a safeguard (for
example, in the case of some lithium battery
types).
● Do not dispose of the battery into fire or a hot
oven, or mechanically crush or cut the battery,
which may result in an explosion.
● DO NOT leave the battery in an extremely high
temperature surrounding environment, which may
result in an explosion or the leakage of flammable
liquid or gas.
● DO NOT subject the battery to extremely low air
pressure, which may result in an explosion or the
leakage of flammable liquid or gas.
Supplement Light
The beam of the light at the distance of 200
●
mm is classified as Risk Group 2 (RG2). Possible
hazardous optical radiation emitted from this
product.
● DO NOT stare at operating light source. May be
harmful to the eyes.
● Wear appropriate eye protection or turn on the
supplement light only at a safe distance (2.9 m)
or in the area that is not directly exposed to the
light when installing or maintaining the device.
Installation
● Never place the equipment in an unstable
location. The equipment may fall, causing serious
personal injury or death.
● This equipment is for use only with corresponding
brackets. Use with other (carts, stands, or carriers)
may result in instability causing injury.
System Security
● You acknowledge that the nature of Internet
provides for inherent security risks, and our
company shall not take any responsibilities for
abnormal operation, privacy leakage or other
damages resulting from cyber attack, hacker
attack, however, our company will provide timely
technical support if required.
● Please enforce the protection for the personal
information and the data security as the device
may be confronted with the network security
problems when it is connected to the Internet.
Please contact us when the device might exist
network security risks.
● Please understand that you have the
responsibility to configure all the passwords and
other security settings about the device, and keep
your user name and password.
Maintenance
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
● A few device components (e.g., electrolytic
capacitor) require regular replacement. The
average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
● If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the device may be impaired.
● To reduce the risk of fire, replace only with the
same type and rating of fuse.
● The serial port of the equipment is used for
debugging only.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -40 °C to 70 °C (-40 °F to
158 °F), and humidity shall be 5% to 95%.
● Place the device in a dry and well-ventilated
environment.
● DO NOT expose the device to high
electromagnetic radiation or dusty environments.
● DO NOT aim the lens at the sun or any other
bright light.
● The equipment shall not be exposed to dripping
or splashing and that no objects filled with liquids,
such as vases, shall be placed on the equipment.
● No naked flame sources, such as lighted candles,
should be placed on the equipment.
● Provide a surge suppressor at the inlet opening of
the equipment under special conditions such as
the mountain top, iron tower, and forest.
4
Publicidad
