fluidra iQBridge RS Guia De Instalacion página 9

INSTALLATION
1 - Mount the iQBridge RS
• Use the installation kit (provided) to mount the iQBridge RS on
the wall using the screws (close to the device it will be connected
to) or directly the device that it will be connected to using the
double sided tape.
2 - Connect the iQBridge RS
Disconnect the device that will be connected (heat
pump, salt water chlorinator, etc.) from the main power
supply before connecting the iQBridge RS.
• Connect the iQBride RS to the device you want to control by
simply pugging it in to the device (see example below).
• Look for the small dedicated watertight plug, accessible from the
electrical connection panel (heat pumps) or hanging below the
device (salt water chlorinators).
Once the iQBridge RS is connected to the device you want to control,
re-connect the device (heat pump, salt water chlorinator, etc.) to the
main power supply. The power ON indicator light turns on steady
green.
The iQBridge RS is powered from the connected product
(heat pump, salt water chlorinator, etc.).
E N
9