cecotec ENERGYSILENCE AERO 5200 LIGHT DESIGN Manual De Instrucciones página 45

4. OPERATION
Remote control. Fig. 11
1. Power button
2. Speed buttons
3. Winter function
4. Summer function
5. Natural Breeze
6. Natural Breeze shut-off
7. Timer buttons
8. Light button
- Use the speed buttons to select the air power level.
- Press the power button to switch the appliance off.
- Use the timer buttons to select the fan operating time. The fan will switch off once the
selected time has elapsed.
- Press the light button to turn the fan's lamp on and off.
Winter Function: press button 3 to activate the winter function. The fan will make air flow
from the bottom upwards, bringing cold air to the top of the room.
Summer Function: press button 4 to activate the summer function. The fan will make air flow
from the top downwards, bringing cold air to the bottom of the room.
Warning:
Invert the spinning direction of the fan while in operation. Hold down the button for approx.
3 seconds: the appliance will beep, and the blades will start slowing down until they stop
spinning. After a few seconds, they will start spinning again in the opposite direction.
Natural Breeze: activate this mode by pressing button 5. The fan will progressively vary the
power level in cycles, providing a feeling of fresh air.
Pairing the remote control with the fan: Press the power button for 5 seconds until you hear
a beep.
Warnings:
- The remote control operates through RF Wireless digital transmission technology. If both
the fan and the lamp are equipped with a switch, turn on the fan at top speed and turn the
light on before using the remote control.
- If the fan or the light cannot be controlled through the remote control, check if the batteries
in the remote control are in good conditions and if they make good contact, that the positive
ENERGYSILENCE AERO 5200 LIGHT DESIGN
ENGLISH
45