EN
I T
To start supplying:
press the ESPRESSO
press the LONG ESPRESSO
The machine will stop delivery automatically when the
programmed measure is reached.
The supply button will light up to a blinking white light
when the product is being supplied. You can stop supply-
ing by pressing the supply button again.
PREPARING THE COFFEE
(1 fl oz /30 ml) or
(1.5 fl oz/45 ml).
If, during the dispensing cycle power supply is inter-
rupted proceed as follows:
- Restore the power supply.
- Press the
ON/STAND-BY
ton to light up to a steady white light.
- Replace the capsule inside the capsule fitting com-
partment with a new one.
- Restart the coffee dispensing.
If, during the dispensing cycle water is exhausted
within the tank proceed as follows:
- Fill the water tank up to the indicated MAX level.
- Replace the capsule inside the capsule fitting com-
partment with a new one.
- Restart the coffee dispensing.
Supplying without a capsule the doses may not re-
spect the programmed quantity.
Once supply is over, lift and then lower the capsule load-
ing lever to unload the exhausted capsule.
To supply again, wait until both the supply button and
the ON/STAND-BY button
white light.
46
and wait for the but-
come on to a steady