Descargar Imprimir esta página

Dreame Z30 Manual De Usuario página 15

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 59
Product Overview
Accessories
1. Soft Dusting Brush
2. Flexible Adapter
3. Rotating Soft Dusting Brush
4. Motorized Mini-Brush
5. Charger
6. Extension Rod
7. Combination Tool
8. Extension Hose
9. Multi-Surface Brush
10. A ccessory Storage Mount (Support
Rod ×1, Storage Mount ×1)
11. P et Deshedding Tool
12. Illumination Soft Roller Brush
Fig. A
Note: The illustrations in this manual are
indicative only. The actual product may
differ.
Component Names
Vacuum Body
1. Dust Cup
2. Dust Cup Release Button
3. Dust Cup Bottom Cover Release Button
4. Battery Pack Release Button
5. Display Screen
6. Power Button
7. Suction Level Switch
8. Antistatic Contact
9. Charging Port
10. Battery Status Indicator
Fig. B
Installation
Installing the Accessories
Note:
• It is not recommended to use the
motorized mini-brush with the extension
rod.
• Please install the accessories according
to the actual cleaning needs.
• It is recommended to use the flexible
adapter when cleaning the low-lying
furniture and not recommended to be
connected to the vacuum body all the
time for daily floor cleaning.
Fig. C-1
Installing the Accessory
Storage Mount
Insert the support rod vertically into the
storage mount until you hear a click.
Fig. C-2
Charging
Fully charge the vacuum before
using it for the first time.
Note:
• The vacuum cannot be used while
charging.
• When fully charged, the battery status
indicator will turn off after 5 minutes and
the vacuum will enter the power saving
mode.
• This will take about 4 hours. Vacuuming
at Turbo mode for a prolonged period
will cause the battery to heat up, which
increases charging time. Allow the
vacuum to cool down for 30 minutes
before charging it.
Fig. D-1
EN
3

Publicidad

loading

Este manual también es adecuado para:

Vzv17a