Presentation Modes
Scan one of the barcodes to configure the scanner to automatically scan barcodes.
These settings drain the battery faster. Please ensure the scanner is charged daily.
Mobile Mode (default)
Reverts back to manual scan mode. For model D740 and S740 only.
Auto Mode (recommended)
Configures the scanner to switch to presentation mode when power is detected on the charging
pins. The scanner will remain on presentaion mode until the scan button is pressed to exit the
mode.
For model D740 and S740
only.
Detect Mode
Configures the scanner to switch to presentation mode when power is detected on the charging
pins. The automatic scan will continue until power is removed.
For model D740 and S740 only
Stand Mode
Scanner is permanently in presentation mode.
For model D740 and S740 only
10