cecotec ENERGYSILENCE 610 MAX FLOW Manual De Instrucciones página 23

1. PARTS AND COMPONENTS
Fig. 1 key:
1. Grille
2. Blades
3. Control panel
4. Tube
5. Height-adjustment knob
6. Bracket
7. Base
8. Oscillation knob
9. Timer knob
10. Speed buttons
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Fan
- Instruction manual
3. ASSEMBLY
1. Place the bracket on the base and fix it using the screw at the bottom of the base, as
shown in Figure 2.
2. Loosen the height-adjustment knob and adjust the tube height. Fig. 3
3. Then, place the control panel on the tube and fix it as shown in Figure 4.
ENGLISH
ENERGYSILENCE 610 MAX FLOW
23