cecotec ENERGYSILENCE 610 MAX FLOW Manual De Instrucciones página 24

ENGLISH
4. Install the back grille in the motor shaft and fix it with the adjustment nut. Place the blade
assembly on the motor shaft and fix it using the fan-blade fixing cap. To do so, turn it until
it is tight, as shown in figure 5.
5. Use a screw to join the rear grille to the front grille, as shown in figure 6.
4. OPERATION
Oscillation function
Press the knob down to activate the oscillation function and back up to deactivate it.
Timer
Turn the timer knob to set the timer up to a maximum of 60 minutes.
Speeds
Press the speed buttons to set speed as desired. The fan has 4 speeds.
5. CLEANING AND MAINTENANCE
- Always unplug the product from the power supply before cleaning or repairing it.
- It is suggested to clean the product with a mild cleaning agent and a soft and wet cloth.
Do not use abrasive products such as solvents, acids, or alcohol to clean the plastic
components, as these could be deformed or damaged.
- Do not allow water to enter the motor or touch the cord during cleaning.
6. TECHNICAL SPECIFICATIONS
Product reference: 08300
Product: EnergySilence 610 Max Flow
Rated voltage: 220 - 240 V
Frequency: 50 - 60 Hz
Power: 70 W
Description
Fan maximum flow
Fan power consumption
24
ENERGYSILENCE 610 MAX FLOW
Symbol Value
F
P
Unit
m /min
3
W