Publicidad
Idiomas disponibles
Idiomas disponibles
Safety information
Use caution with voltages above 30 V ac rms, 42 V ac peak, or 60 V dc. These voltages pose a
shock hazard.
Replace the battery as soon as the low battery indicator (
) appears.
Disconnect circuit power and discharge all high-voltage capacitors before testing resistance,
continuity, diodes, or capacitance.
Do not use the Meter around explosive gas or vapor.
When using the test leads, keep your fingers behind the finger guards.
Remove test leads from the Meter before opening the Meter case or battery door.
Never operate the Meter with the cover removed or the battery door open.
Comply with local and national safety requirements when working in hazardous locations.
Use proper protective equipment, as required by local or national authorities when working in
hazardous areas.
Use only the replacement fuse specified or the protection may be impaired.
38
Publicidad
