Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
• FOR YOUR SAFETY: Surfaces of the fire pit can remain extremely hot for a period after use. Allow
45 minutes to cool down before touching or moving the fire pit.
IF APPLICABLE:
• Allow heating item to cool completely before placing on lid.
• DO NOT use heating item while lid is installed. Always remove the lid while heating item is in use.
Only use the regulator and hose assembly provided with this unit. Replacement parts must be
supplied directly by manufacturer.
Inspect the burner before use of this unit. If the burner shows any kind of damage, do not operate
the appliance. For assistance with repair or replacement of the burner or any other parts, call
manufacturer at 1.877.447.4768.
NOTE: You must follow all steps to properly assemble this heating item. Make sure the gas
valve is turned 'OFF' before assembling. Do NOT attempt to assemble without proper tools.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any parts are missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly (included): Wrench
Combustible materials should not be within 72
inches of the top of the unit, or within 48 inches
around the entire unit.
DANGER
Always place this outdoor fire pit on a hard, level,
non-combustible surface such as concrete, rock or
stone.
Page 4
Publicidad
