Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
PRODUCT SPECIFICATIONS
Keyless Chuck ....................................................................................................................................... 1/32 - 1/8 in. Universal
Rated Speed .......................................................................................................................................5,000-25,000/min (RPM)
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged.
Use of a product that is not properly and completely
assembled or with damaged or missing parts could
result in serious personal injury.
If any parts are damaged or missing, please call 1-800-776-5191 for assistance.
OPERATION
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Hearing protection may also
be required depending on the type of attachment used
and as prescribed elsewhere in this Operator's Manual.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification
is misuse and could result in a hazardous condition
leading to possible serious personal injury.
NOTICE:
To prevent damage to the spindle or spindle lock,
always allow motor to come to a complete stop before
engaging the spindle lock.
APPLICATIONS
You may use this product for the purposes listed below:
Carving, engraving, etching, polishing, cleaning, removing
rust, sanding, cutting, grinding, sharpening, drilling, and
routing
LED LIGHT FUNCTIONS
See Figure 1, page 14.
When the tool is charged, the LED light will indicate the
status of the battery.
LED INDICATIONS WHILE USING TOOL
BATTERY STATUS
Normal
Battery Level <25%
Low Battery
Excessive Force
Over Temperature
8 – English
LED LIGHT SCENARIO
Solid Green (no flashes)
Solid Red (no flashes)
Flashing Red (3 flashes)
Flashing Red (6 flashes)
Flashing Red (9 flashes)
Publicidad
