Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Lower the blending shaft to a
maximum 2/3 of its length into
the container with ingredients.
Ensure the bell guard and blades
or whisk beaters are completely
submerged in the ingredients.
• NEVER use unapproved cleaning methods inconsistent with these instructions to avoid product damage.
• NEVER use abrasive cleaning agents, concentrated bleach, automatic dishwashing detergents, oven cleaners, steel wool, or other abrasive pads.
• NEVER put the power cord, power plug, or motor body in water or other liquid.
• NEVER clean the appliance with a water jet.
• NEVER allow the blending blades to soak in water for long periods of time.
• Ensure no water remains inside the blending wand or whisk attachment to avoid water running into the motor body when reattached.
• Unplug the blender and wring excess water out of the cloth or sponge when cleaning around the controls or any electrical part.
• The motor base is not dishwasher safe.
146843
U
se
NOTES:
• NEVER submerge the motor body into the ingredients.
• When beginning to blend, especially with hot ingredients, ALWAYS start
on low speed and gradually increase the speed to avoid splattering and
over-processing. Use a tall container or make small quantities to reduce
spillage or splash.
• NEVER use the immersion blender for more than ten (10) minutes contin-
uously. The continuous run mode will automatically shut off the unit after
10 minutes of use.
• NEVER leave the working area when the appliance is in use, including
during the use of Continuous Run mode.
7.
Press the On/Off Button to start blending on Speed 1.
• Press the Speed Select Button to increase to Speed 2 or Speed 3.
• Depress the Continuous Run Button at any time to lock in a speed
2/3
and start the Continuous Run mode.
• Depress any button to stop the Continuous Run mode.
8.
Slowly move the immersion blender around in the ingredients to ensure the
1/3
best blend or use the Pot Clip (sold separately) mounted to the bottom of the
motor assembly to hold the Immersi-Prep 14 in position on the bowl or pot rim.
9.
To stop, release the On/Off Button. Allow the blending wand or whisk attach-
ment to come to a complete stop before removing the immersion blender from
the blending container.
c
c
are and
leaning
CAUTION
7
Publicidad
