Publicidad
Idiomas disponibles
Idiomas disponibles
English
2.2
Device description
2.2.1. MTX 202
1
4
8
7
6
5
14
12
Dangerous voltages may be present at the input terminals and may not be displayed.
1
2
3
4
3
2
5
9
6
10
7
11
8
9
10
11
12
13
13
14
14
4000- and 6000-count TRMS digital multimeters
Display (See §. 2.3).
Range key : operative in VAC, VDC, VLOWZ, Ω, C, AAC, ADC ranges.
Yellow key : MODE AC/DC
The AC mode is selected (default) on V and DC is selected (default) on A.
• Switch to AC or DC mode by briefly pressing this key (short beep).
• The current mode is displayed on the LCD.
• To disable the Sleep mode, hold down
• Sleep mode is disabled and symbol
Hold key :
• Holds the display on the current value and froozes it (short press).
• A second short press returns the multimeter to normal mode.
• This key is operative in all ranges (excepted NCV).
OFF : power is off.
NCV : Non Contact Voltage Detection (230V) 50 Hz
VLowZ : Low impedance voltage measurement, AC
V AC/DC : voltage measurement (10M), AC or DC
T : TK-thermocouple temperature measurement, in °C or in °F
OHM / CONTINUITY / DIODE / CAPACITANCE
A : current measurement in A, AC or DC
Common (return) terminal for all measurements
Input terminal for voltage, resistance, continuity, diode, capacitance, and temperature
measurements (+)
Input terminal for AC and DC current measurement to 10A
while turning the meter on.
(permanent) won't display any longer.
Publicidad
