Publicidad
Idiomas disponibles
Idiomas disponibles
A
H1
A
H2
1
1. Remove the screw plug from the gear housing
and inject some grease into housing.
2. Tighten the screw.
Lubricating the
Cutting Attachment
H3)
A
H3
2
1. Remove the screw plug from the gear housing
and inject some grease into housing.
2. Tighten the screw.
2
1
2
(See Fig.
1
Sharpening
WARNING: Do not operate your machine
with dull or damaged cutting blades, which
will cause overload and unsatisfactory
performance. When cutting performance begins to
deteriorate, please have the blade resharpened by
a professional. Always wear protective gloves when
handling the trimmer blade and only sharpen the
cutting edge.
Only sharpen the cutting edge. Do not grind blunt
projecting parts of the cutting blade or its guard.
Use a whetstone to remove burr from cutting edge.
After sharpening, clean away the dust from the
blade in a safe manner.
Cleaning the Blade
Spray both sides of the cutting blade with resin
solvent, Insert the battery and turn on the hedge
trimmer for a few seconds, this will ensure even
distribution of the resin solvent across the entire
cutting blade.
NOTE:
Please refrain from using a high-pressure
cleaning machine to clean the blades, and avoid
using any liquids other than resin solvent.
CLEANING
1. Switch off the trimmer and remove the battery.
1. Do not use aggressive detergents or solvents.
Clean the machine after use with a damp cloth
dipped in mild detergent.
2. Keep battery connection free of dirt and debris,
and clean with a soft and dry brush or cloth.
3. Do not spray water onto the motor and electrical
components.
STORAGE
1. Remove the battery pack from the trimmer before
storage.
2. Store the trimmer and the battery in a dry and
secure place that is inaccessible to children and
other unauthorized people.
3. If the machine becomes wet in the rain during
operation, the machine and the battery should
be dried before storing or charging. Remove the
battery and reinsert it if the machine fails to turn
on.
FOR BATTERY TOOLS
The recommended ambient temperature range for
discharging is -4°F~113°F (-20 ~45 ).
The recommended ambient temperature range for
the charging system during charging is 23°F~113°F
(-5 ~45 ).
EN
11
Publicidad
