Publicidad
Idiomas disponibles
Idiomas disponibles
shaft fully.)
4. Finish the assembly by tightening the knob
clockwise.
5. To disassemble, loosen the knob, turn counter
clockwise, then press the release button and
pull the shafts apart. Replace the protective cap
on the attachment shaft to ensure that dust and
debris do not get into the shaft.
B1
B2
EN
2
B3
8
3
1
3
1
2
Adjust the blade angle (See Fig. C)
A
C
2
1
WARNING! Please remove battery pack
before adjusting the blade angle.
WARNING! Please keep the blade sheath
properly fitted during adjusting the blade
angle.
1. Pull the adjustment collar down, select the
desired blade angle and release the adjustment
collar. Make sure the holes are aligned and
inserted.
2. The angle of the cutting blades can be adjusted
to 55 degrees upwards and 90 degrees
downwards.
Before usage, remove the Blade Sheath
first. (See Fig. D)
A
D
55°
90°
Publicidad
