Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4.
Use the hose clamp to secure the flexible tube
around the elbow tube.
5.
Place the control cable over the wire mounting
clip and ensure it is securely locked in place by
the curved wire tabs.
3.2
INSTALL THE VENT TUBE
1.
Align the grooves on the vent tube with the tabs
on the upper blower tube.
2.
Slide the vent tube onto the upper blower tube
aligning the tabs with the corresponding grooves.
3.
Rotate the vent tube clockwise until the tabs lock
into place.
Put the cord in the cord retainer.
3.3
INSTALL THE LOWER BLOWER TUBE
1.
Align the grooves on the lower blower tube with
the tabs on the vent tube.
WARNING
English
2.
Slide the lower blower tube onto the vent tube
aligning the tabs with the corresponding grooves.
3.
Rotate the lower blower tube clockwise until the
tabs firmly lock into place.
Note: The lower blower tube has two adjustable
positions. To adjust the length, utilize the secondary
grooves of the lower blower tube and secure them with
the tabs on the vent tube.
3.4
ADJUST THE HARNESS
1.
Put on the backpack and position it on your back.
2.
Pull the ends of the straps down to tighten the
harness.
3.
Connect the horizontal chest strap across your
chest.
4.
Pull the end of the chest strap to tighten it,
providing additional support and stability.
5.
Lift the tabs of the strap adjusters to loosen the
straps.
8
Publicidad
