cecotec CONGA ASH 2000 HOME Manual De Instrucciones página 37

2. Install the high efficiency filter on top.
3. Set the upper part of the vacuum cleaner on the tank.
4. Set the flexible hose in the suction opening.
5. Install the desired nozzle on the other end of the flexible hose.
6. To start vacuuming, switch on the appliance using the power switch.
7. If you want to use the blowing function, simply connect the flexible hose to the relevant
hole.
8. Always unplug the appliance after each use.
4. CLEANING AND MAINTENANCE
Fig. 4
1. Open the dirt tank.
2. Remove the high-efficiency filter and the filter bag from the tank.
3. Shake the dust out of the high-efficiency filter to clean it.
4. Empty the dirt tank.
5. Wash the filter bag and the high-efficiency filter with clean water if necessary.
6. Please note: before reinstallation, be sure to dry the filter bag and the high-efficiency filter
completely if they have been previously washed with water.
7. Put the filter bag and the filter back in place inside the vacuum cleaner.
WARNING: the surface of the appliance may only be cleaned with a dry or damp cloth.
5. TROUBLESHOOTING
Problem
The motor does
not start
Possible cause
The power cord is not plugged
into a socket
The power socket is damaged
The vacuum cleaner was not
switched on
Possible solution
Properly plug in the device
Check that the socket is not
damaged
Switch the device on
CONGA ASH 2000 / 3000 / 4000 HOME
ENGLISH
37