Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an
integral component of the product. Therefore, please store them
and the packaging carefully in case questions arise in the future.
Please always include these instructions when handing on the
product to a third party. This product must be assembled by an
adult. This product is designed for private / domestic use only.
This product is not designed for commercial / industrial use. The
use of the product requires specific skills and knowledge to be
able to avoid injuries due to crashes and collisions. Always adjust
according to the age of the user and use for the purpose it has
been designed for.
TECHNICAL SPECIFICATIONS
Item:
HUDORA BigWheel
Item number:
14220, 14221
Dimensions:
approx. 80 cm in length, deck approx. 31 x 11 cm
Product weight: approx. 3.5 kg
Class:
A, 60 kg maximum user weight
Purpose:
Leisure scooter for use on public areas, no toy.
If you have assembly problems or would like further information
on the product, we have all you need and more at http://www.
hudora.de/.
CONTENTS
1 x Scooter | Tools | 1 x These instructions
Other parts which may be included with the delivery in some cir-
cumstances are not required.
SAFETY INSTRUCTIONS
• This scooter needs to be partially assembled before first using.
To avoid pinching or entrapment please follow exactly the in-
structions on assembly below and make sure that all parts are
assembled correctly and tightly.
• Keep young children away while assembling. There is a risk of
choking hazard from small parts!
• Wear suitable protective clothing for your own safety. Wear
personal protective equipment. This includes at least: hand /
wrist guards, knee pads, head protection and elbow pads. Nev-
er use the scooter without sturdy shoes!
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e.
those which are flat, clean, dry, and use the scooter where
possible away from other road users. Avoid sloping ground.
The brakes may become hot if the scooter has been used for a
while! Your footwear could be damaged! The brakes shouldn't
be touched until they have cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts
are intact and tight, e.g. the folding mechanism and the height
setting of the handlebar. The functions of self-securing screw
threads can be impaired after repeated loosening and tighten-
ing of the connecting elements. Check especially for the correct
alignment and fastening of the steering set-up.
• Make sure that the stand is folded safely while driving.
• Do not use the scooter at twilight, at night or in poor visibility.
180 Advanced Junior
®
Do not use it on roads or thorough-fares or on slopes or hills.
Avoid being in the proximity of stairs and open water.
• The scooter is not suitable for jumps.
• Prior to using the scooter, please inform yourself about re-
stricting applicable traffic regulations for the intended area of
application.
• The use of the product requires specific skills and knowledge to
be able to avoid injuries due to crashes and collisions.
• Children should only use the product when they are under adult
supervision.
• Ensure when riding that the logo on the handlebar points to the
front or else that the push buttons is as such oriented back-
wards.
INSTRUCTIONS ON ASSEMBLY
Mount the front wheel as shown in Picture 1. Insert the long side of
the sleeve bolt into the front axle from the right and the short bolt
from the left. Tighten the screw with a torque of 5 Nm. The scooter
is then fully assembled and ready for use (Picture 7).
PLEASE PROCEED AS FOLLOWS TO
GET THE SCOOTER READY FOR USE
• Pull on the lever to the right above the running board to loosen
the transportation lock. (Picture 2)
• Unfold the scooter's handlebars upwards.
• Now push the folding hinge towards the handlebar stem until
you hear it click into place. (Picture 3)
• Open the handlebar clamp by lifting the lever. Insert the han-
dlebar grips into the T-section of the handlebar stem. Use
your thumbs to press down both locking buttons until the the
grips can be easily pushed into the T-section. Turn the handle-
bar grips until the locking buttons are positioned in the two
openings intended for them and you hear them click into place.
Check that both handlebar grips are fitted correctly by pulling
both outwards. If the two handlebar grips can no longer be
moved, they are properly engaged. Close the handlebar clamp
again to firmly fix the handlebar ends by pressing the lever back
down against the handlebar (Picture 4). The contact pressure of
the handlebar clamp can be finely adjusted using the two Allen
screws on the underside.
• For the height lock of the handlebars, the twist lock should be
loosened as much as possible to ensure easy adjustment. Re-
lease the twist lock by turning the twist lock counter-clockwise
as shown in Picture 5.
• The handlebars can be locked into place at 2 different heights.
Pull the handlebar rod out of the handlebar stem until it is at
the required height and the relevant button has snapped into
place. The maximum height cannot be exceeded due to the in-
tegrated lock.
• Now close the twist lock again by turning it clockwise. (Picture 5)
• Picture 8 shows the unfolded scooter with the stand extended.
• Always check all parts before use to ensure they are fitting
tightly, particularly the folding mechanism, the handlebar lock-
ing and the wheels.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOWING ACTIONS
• Release the twist lock by turning the twist lock counter-clock-
wise. (Picture 5)
6/24
Publicidad
