Makita VC003GL Manual De Instrucciones página 11

To pick up water or wet dust only, the water filter is more
suitable than the cloth filter.
When installing the water filter, align its mounting posi-
tion marking with the one on the tank.
3
3
Fig.14
► 1. Water filter 2. Tank 3. Mounting position marking
NOTE: It is recommended using water filter when
picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
cloth filter.
Installing paper pack
Optional accessory
WARNING:
Before using a paper pack,
make sure that the cloth filter or prefilter is used
together. Failure to use the cloth filter / prefilter
together may cause unusual noise and heat, resulting
in a fire.
NOTICE:
Never pick up water or other liquids
or wet dusts when using a paper pack. Picking up
such things may cause the paper pack breakage.
NOTICE:
When using the cloth filter, make sure
that the float and the float cage are attached on
the head unit.
NOTICE:
When using the prefilter, make sure
that the powder filter and the damper are used
together.
1. Unfold a paper pack.
2. Align the paper pack opening with the dust intake
of the tank.
3. Install the paper pack into the tank with its card-
board opening hooked on the paper pack holder.
1
1
4
2
Fig.15
► 1. Paper pack 2. Cardboard opening 3. Paper pack
holder 4. Dust intake
Installing polyethylene bag
With a polyethylene bag installed in the tank, you can
easily empty the tank without letting your hands dirty.
Lay a polyethylene bag over the tank, and slip one side
of the top edge of the bag at its open end in between
the holder plate and the front wall of the tank.
1
2
3
Fig.16
► 1. Holder plate 2. Front wall of tank 3. Polyethylene
bag
11 ENGLISH
3
2