Descargar Imprimir esta página

DeWalt DCD1007 Traducido De Las Instrucciones Originales página 43

Ocultar thumbs Ver también para DCD1007:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 44
2. Remove the protective cover and insert the Tool Connect™
Chip into the empty pocket 
3. Ensure that the Tool Connect™ Chip is flush with the housing.
Secure it with the retaining screws and tighten the screws.
4. Refer to Tool Connect™ Chip Instruction Sheet for
further instructions.
Belt Hook and Bit Clip (Fig. A)
Optional Accessories

WARNING: To reduce the risk of serious personal
injury, ONLY use the tool's belt hook to hang the
tool from a work belt. DO NOT use the belt hook for
tethering or securing the tool to a person or object during
use. DO NOT suspend tool overhead or suspend objects
from the belt hook.

WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook is secure.
IMPORTanT: When attaching or replacing the belt hook or bit
clip, use only the screw 
 12 
tighten the screw.
The belt hook 
 11 
and bit clip 
of the tool using only the screw 
left‑ or right‑handed users. If the belt hook or bit clip is not
desired at all, they can be removed from the tool.
To move the belt hook or bit clip, remove the screw that holds
it in place then reassemble on the opposite side. Be sure to
securely tighten the screw.
Protecting the Environment
w
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can
be recovered or recycled, reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long‑life battery pack must be recharged when it fails to
produce sufficient power on jobs that were easily done before.
At the end of its technical life, discard it with due care for
our environment:
Run the battery pack down completely, then remove it from
the tool.
Li‑Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed of properly.
 25 
.
that is provided. Be sure to securely
 13 
can be attached to either side
provided, to accommodate
 12 
EnGLIsh
41
41

Publicidad

loading

Este manual también es adecuado para:

Dcd1007ntDcd1007h2tDcd1007ww1tDcd1007n