Descargar Imprimir esta página

Royal Catering RCSL 1/6A Manual De Instrucciones página 35

Maquina granizadora

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 144
EN
3.3.
Preliminary steps
Removing the machine from the packaging:
Remove the machine from its packaging and carefully inspect it for any visible damage that
may have occurred during shipping. Remove any protective coverings such as plastic bags
and make sure they are kept out of the reach of children.
Moving the machine:
Never lift the machine by the tank or plastic parts as this may cause damage. Always grasp
the machine at the bottom, near the legs, and use both hands when lifting or carrying it to
ensure stability and avoid damage.
Power check before starting:
Before connecting the machine, check that the electrical installation is properly grounded
and meets legal requirements and the voltage and current specifications listed on the
nameplate or in the manual. Plug the machine directly into the socket or use a single,
certified extension cord with a maximum length of 3 meters. Avoid using multiple power
supplies or extension cords at the same time, as this may damage the device and void the
warranty.
The device must be located in such a way that the power plug can be reached at any time.
Consultation with a specialist:
If you are unsure about the appropriate power supply or electrical requirements of your
device, have the electrical installation and device checked by a qualified technician before
first use.
Liability Warning:
The manufacturer and distributors are not liable for damage to the machine, property or
operators resulting from incorrect connection or installation of the machine.
Preparation for launch:
Before starting the device, clean it thoroughly in accordance with the recommendations
contained in the chapter on cleaning and maintenance.
Device installation:
Place the machine away from heat sources and provide adequate space around the device
to allow proper air circulation. The ambient temperature must not exceed 40°C. Make sure
there is at least 20 cm of free space on each side of the device. The device should always
be used on an even, stable, clean, fireproof and dry surface and out of the reach of children
and people with limited physical, sensory and mental functions .

Publicidad

loading

Este manual también es adecuado para:

Rcsl 2/6a