Royal Catering RCSL 1/6A Manual De Instrucciones página 45

3.7. Troubleshooting
The most common problems
No cooling: Typically, the drink does not change
significantly after the device has been operating for
some time.
Poor cooling: Poor cooling performance, working for a
long time, it can cool normally, but cannot achieve the
desired effect.
Out of material: When the device is running, the mixer
is working, but when the handle is pulled down, no
material is discharged.
"--" alarm: the mixer running speed is normal for 2~3
seconds after starting, then "--" alarm appears, please
contact customer service for help.
"NL" alarm: appears after some time of operation and
the mixer is running slowly.
Material leak: A leak is a leak from a beverage keg or
spout while the unit is operating.
Frozen cylinder: The beverage tank or spout is frozen
while the machine is operating.
EN
1）Check if the power connection is correct, if
it is not connected, please connect it properly;
2）Check if the cooling light is on. If it is not lit,
press the cool button. If the light is on and the
unit is still not cooling, contact customer
service.
1）Check whether the raw materials used
meet the requirements
2）Adjust gear position setting, adjust high
quality position
3）Check whether the machine placement
position meets the requirements
4）If you still cannot resolve the above issues,
please contact customer service.
1）Check whether the raw materials used
meet the requirements.
2）Adjust the gear position setting, adjust the
lower gear position;
3）If you still cannot resolve the above issues,
please contact customer service.
1) Check whether the raw materials used meet
the requirements.
2) Adjust the gear position and lower the gear
position.
3) If you still cannot solve the above problems,
please contact customer service.
1) Check and replace the seal ring
1) Check whether the raw materials used meet
the requirements to add the appropriate
amount of sugar or water.
2) Press the cooling button, stop cooling and let
stand for a while, then discharge.
Solution