D+H CDM-1-PLP Manual Original página 6

WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this product.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Intended use
- Chain drive for electric opening and closing of
windows and flaps in the facade and roof area
- Operating voltage 24V DC
- Useable for smoke ventilation as well as daily
natural ventilation
- Suitable for indoor mounting only
ACB version:
- See also ACB Planning Manual
Scope of supply
Drive unit
Depending on the type of window, different bracket
sets are available separately.
NOTICE
The drive is supplied without connection cable.
Pre-assembled silicone cables with connectors or
connectors only must be ordered separately.
Selection guide see page 19.
Pressure load diagram
Observe maximum pressure load of the chain!
Maximum pressure load of chain is not automatically
identical with maximum pressure force of the drive!
1200
1000
800
600
400
200
0
1000 N
6/24
CDM-1-ACB / PLP
Stroke (mm)
700 N
Safety notes
Safety extra low voltage 24V DC!
Do not connect directly to the mains supply!
- Connection must be carried out by a certified
electrical technician
- Danger of crushing hands and fingers!
- Consider installation height ≥ 2.5 m
- Keep people away from the operating area of the
drive
- Do not touch the chain!
- Keep children away from the control
- Observe pressure load diagram of the chain
- Use only in dry rooms
- Suitable for indoor mounting only. Use rain
detector in locations if there is a risk of rain
- Use unmodified original D+H parts only
- Observe mounting instructions of bracket set!
Observe enclosed red safety note!
Features
- Micro processor controlled electronics
- SHEV-high speed function (fast-running feature in
case of an alarm)
- Relief of pressure on window gasket after closing
- Outstanding quiet performance thanks to
acoustic decoupling of the drive components and
reduced motor speed in ventilation mode
- High-strength, hardened, rigid steel chain with
corrosion protection and lifetime lubrication
- Particularly efficient, wear-free, brushless motor
- Short overall length due to 3-fold chain deflection
- Centre chain outlet
- Plug-in cable connection, plug connector with
screw terminals
PLP version:
- Stroke programming with magnet
- Individual programming, e.g. of the opening
stroke, via Powerline (PLP1 and SCS software)
ACB version:
- ACB (Advanced Communication Bus) bus
interface with ModBus protocol for the connection
to compatible D+H control panels or direct
integration into building management systems,
for example
- BSY+ electronics for reliable and accurate
synchronous operation of up to 4 drives
- Rated voltage and Bus-signals loopable for max.
2 drives
- Direct connection of additional closing edge
protection at the drive possible (SKS option)
- Individually programmable via software SCS
English 99.829.20 1.0/04/24