BESAFE Go Beyond Manual Del Usuario página 9

4.
Take the shoulder belt part of the 3-point belt and guide it around the
back of the seat and into the shoulder belt guider. Make sure it sits fully
inside the shoulder belt guider. (1, 2)
5.
Tighten the shoulder belt part by pulling on it. With your other hand, keep
the child seat in place. (3)
6.
Leave the carry handle up in upright position and the inner part of the
seat in upright position (NOT lay flat position). (4, 5, 6)
7.
If you have installed the child seat on the back seat: Move the front
vehicle seat backwards, so that it is in light contact with the child seat. If
this is not possible, then move the front seat forward to create as much
distance as possible between the child seat and front seat, preferably at
least 25 cm.
1
4
2
5
3
6
BeSafe Go Beyond | 9