Publicidad
WARNING: Adjust the Front Handle as
desired so as to make sure your front
arm is straight during operation.
Assembling and disassembling the
attachment. (See Fig. B1, B2, B3)
1. Remove the protective cap from the end of the
attachment shaft.
2. To assemble, align the triangle icon on the button
with the arrow label on the attachment shaft.
3. Push the shafts together until you hear a "click".
The edge of the arrow label should be close to
the shaft connection housing.
4. Finish the assembly by tightening the knob
clockwise.
5. To disassemble, loosen the knob, turn counter
clockwise, then press the release button and
pull the shafts apart. Replace the protective cap
on the attachment shaft to ensure that dust and
debris do not get into the shaft.
B1
EN
B2
2
8
3
1
B3
3
2
Installing & removing the battery pack
(See Fig. C1, C2)
C1
C2
1
1. Slide the battery pack into the battery
compartment until you hear a click.
2. Press the battery pack release to release battery
pack from your tool.
1
2
Publicidad
