Aqua Medic Ocean Clear Manual De Instrucciones página 12

3.2. Operation
Fig. 8: Controller
1. Operating indicator light
2. Motor operation
3. Alarm/pause
4. Operating mode HIGH: complete fleece in the filter housing is replaced
5. Operating mode ECO: fleece in the filter housing is only partially replaced
6. Pause
7. Mode selection: High or ECO
8. Manual control: press first time: motor on/ press second time: motor off
9. 12 V power supply connection
10. motor connection
11. Socket for float switch
- Operating indicator light (Fig. 5, No. 1):
Green light on - DC power supply is working
Green light off - DC power not available
- Motor operation LED (Fig. 5, No. 2):
Motor operation green light, long green light - indicates that the motor is running
- LED: alarm/pause (Fig. 5, No. 3):
1. Red light is always on - pause
2. Red light flashes - pause. Motor operation is resumed after 10 minutes
3. Red light not illuminated - normal operation
- LED mode indicator (Fig. 5, No. 4 and 5):
HIGH mode: fleece is completely replaced (high load, higher fleece consumption)
ECO mode: fleece is only partially replaced (normal load, lower fleece consumption, more optimal fleece
utilisation)
- Key functions:
MODE (Fig. 5, No. 7): selection button for the operating mode. The selected operating mode is indicated by the
HIGH (Fig. 5, No. 4) or ECO (Fig. 5, No. 5) LEDs.
12