Assemble The Platter System; Connect And Start Djing - Rane TWELVE Guia Del Usuario

Setup
Before getting started:
• Read the Safety & Warranty Manual before using Twelve.
• Make sure all items listed in
are sold separately.

1. Assemble the Platter System

1. Remove the Twelve base from the packaging. Remove the platter assembly from the
package (underneath Twelve). Place Twelve on a flat, stable surface for assembly and
operation.
2. Place the platter onto the Twelve base by aligning the pins in the
bottom of the platter with the holes in Twelve's motor. Press it down
firmly. Check to make sure that it rotates uniformly and does not
wobble excessively.
3. Place the slipmat onto the platter. Then place the Control Disc over
the spindle (with the attached Quick Release Adapter on top). To
lock the Control Disc to the spindle, pinch the top of the spindle while
slowly rotating the disc until you hear it click. It locks when the groove
in the spindle lines up directly opposite to the button on the side of
the Quick Release Adapter.
Note: If you would like to adjust the slip friction of the disc, consider
placing 1-4 of the included spacers over the spindle, underneath the
slipmat. The more you elevate the Control Disc with the spacers, the
more spinback you will get.

2. Connect and Start DJing!

1. Make sure you have downloaded and installed the latest version of your DJ software.
2. Place Twelve on a flat, stable surface.
3. While the power is switched off, plug the included power cable into Twelve first, then plug
the cable into a power outlet.
4. Power on Twelve using the power switch.
5. Use a standard USB cable (included) to connect the USB Port to one of the following:
•
If you are using Twelve with the Rane Seventy-Two mixer (sold separately), connect
the USB cable to the Deck 1 or Deck 2 USB ports labeled Twelve/Controller.
•
If you are using another mixing interface, connect the USB cable to an available
USB port on your computer or a powered hub connected to the computer.
6. Open Serato DJ Pro and go! For more information on how to use Serato DJ Pro with
Twelve, visit support.serato.com.
4
Introduction > Box Contents are included. Items not listed