Descargar Imprimir esta página

SEVERIN FS 3601 Instrucciones De Uso página 13

Sellador de bolsas de vacío

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
Opening the cover
∙ First press the
ventilate the unit. Then push down on
both front corners of the cover to release
it.
∙ Lift up the cover and remove the bag.
Hint: Should any residual liquid be found
inside the sealed seam, wipe the seam
dry and let it go through another sealing
cycle. Caution: The bag opening must
be absolutely dry, to guarantee a seal
that is safe and airtight.
∙ To interrupt the process, press the
button.
∙ Disconnect the appliance from the
mains.
Using with a vacuum container
(Vacuum container not included)
Hint: Suitable vacuum containers
can be ordered conveniently on the
internet from our homepage http://www.
severin.de under the section „Service /
Ersatzteil-Shop".
Preparing the container
∙ Place the prepared food in a vacuum
container.
∙ Replace the lid on the container.
∙ Caution: The rim of the container
(seals, gaskets etc.) must be absolutely
clean, dry and free of fat or oil!
Preparing the air-extraction process
button to
∙ Connect the appliance to the mains.
∙ Push down on both front corners of the
∙ Lift up the cover.
∙ Slide the larger opening of the
∙ Fit the other end of the hose to the valve
Air extraction:
∙ Press the
∙ The
∙ Once the process is complete, the LED
∙ To interrupt the process, press the
∙ Disconnect the appliance from the
Opening the container
∙ To open the vacuum container, push
cover to release it.
connecting hose firmly onto the suction
outlet.
on the vacuum container.
LED is lit while the air is
being extracted from the container.
goes out and the hose can be removed.
button.
mains.
down on the valve using a suitable
implement. Once air is admitted, the lid
can be taken off.
button.
13

Publicidad

loading