SEVERIN MW-7892 Instrucciones De Uso página 26

Ocultar thumbs Ver también para MW-7892:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 53
Display symbols
AUTO
An automatic cooking programme has been selected.
The microwave power is set at 0%.
This symbol will blink while the appliance is ready for the cooking-time being
entered. (With automatic cooking programmes, the cooking-times cannot be
changed.)
The grill function has been selected.
The time is displayed or changed.
The childproof safety device is activated.
%
The display value is shown as a percentage.
g
The display value is shown in grammes.
The automatic defrost programme has been selected.
The microwave function has been selected.
COMB1
The combination programme
The microwave power is set at 100 or 80 %.
COMB2
The combination programme
The microwave power setting is between 60 and 20 %.
Before cleaning the appliance, ensure it is disconnected from the power supply and has
cooled down completely.
Do not clean the unit with water. Make sure that no water - however small an amount - is
allowed to enter the ventilation slots on the inside or outside of the unit. Do not use any
steam cleaning appliances.
The interior surfaces must be cleaned thoroughly after each cycle of use. The inside of
the door as well as the door frames must be kept clean at all times.
The entire unit may be wiped with a slightly damp lint-free cloth and a mild household
detergent. Wipe thoroughly dry afterwards.
Do not use abrasives or harsh cleaning solutions. Commercially available sprays
specifically developed for cleaning conventional baking ovens are not to be used.
The glass turntable and roller ring are dishwasher-safe. The roller ring as well as the
guiding track area underneath the glass turntable must be kept clean at all times.
The grill rack may be cleaned in hot, soapy water.
has been selected.
has been selected.
Cleaning
26

Publicidad

Tabla de contenido
loading

Tabla de contenido