Indicator Lights - RIDGID B-500 Instrucciones De Uso

In some cases, chips will build up between the work
piece and the guide rollers. In most cases, the guide
rollers will ride over the chips with no issue other
than a slight increase in cranking force. If the unit
binds or chips need to be removed during bevelling,
turn the tool off and unplug it prior to removing chips
or removing the pipe.
Figure 20A – Bevelling Operation (Fixed Workpiece/Mov -
ing Beveller)

Indicator Lights

999-995-045.09_REV. F
Indicator Lights
Figure 21 – Indicator Lights
Model B-500 Transportable Pipe Beveller
Figure 20B – Bevelling Operation (Fixed Workpiece/Mov -
ing Beveller)
Figure 20C – Bevelling Operation (Fixed Beveller/Rotating
Pipe)
Lights Illuminated
All
Two Yellow
One Yellow/OneGreen
Two Green
One Green/OneRed
Two Red
Condition
Plugged in, switch OFF
Crank speed too slow.
Optimum crank speed.
Crank speed too fast.
13