Tabla de contenido
Publicidad
To Raise or Drop the Feed Dogs
The drop feed dogs lever is located
underneath
the
free arm bed on the back side of the machine.
(_ To drop the feed dogs, push the lever in the
direction
of the arrow as illustrated.
To raise the feed dogs,
push the lever in the
direction
of the arrow as illustrated.
Feed dogs must be up for normal
sewing.
I
(b
®
Darning
1(_ Stitch width:
0
(_) Stitch length:
Any
_-_ Needle thread tension:
2 to 6
(_) Pressure adjusting lever:
0
(_) Presser foot F:
Satin stitch foot
L'_ Feed dogs:
Dropped
Drop the feed dogs.
Place fabric,
with the hole in
the center, on an embroidery
hoop, as shown.
Lower the presser foot [F] and sew at slow speed.
Move the fabric back and forth slowly
until the
darning
area is covered.
Turn the fabric
1/4 turn
(90 °) and sew another
layer of stitching
over the first
layer. After darning
is completed,
return the pres-
sure adjusting
lever to 3 for normal
sewing.
NOTE:
If fabric is thin or badly damaged,
place a
separate
piece of fabric
under the hole to
reinforce
it.
I
I
I
I
O
®
WIDTH
LENGTH
®
®
J
J
42
Publicidad
Tabla de contenido
