SEVERIN PG 1525 Instrucciones De Uso página 13

surfaces as well as the heating element
become very hot during operation.
Even after the heating element is
switched off, it must not be touched until
it has suffi ciently cooled down - there is
otherwise a severe danger of burns.
∙ Do not allow the power cord to touch any
hot parts of the appliance.
∙ Always remove the plug from the wall
socket
- before fi lling the grill pan with water,
- after use,
- in case of any malfunction, and
- during cleaning.
∙ The use of an extension-lead reel causes
a loss of power, possibly combined with
a subsequent heat build-up in the cable.
It is therefore necessary to unwind the
cable completely if a cable reel is used.
Make sure that the reel is approved for
outdoor use by the manufacturer.
∙ Never move the grill while it is in use
or still hot. Always allow the appliance
suffi cient time to cool down before
carrying, transporting or storing it. Pour
out any remaining water after use.
∙ Ensure that the grill is not stored
outdoors, or in any other location where
it might be subjected to extremes of
temperature or high humidity.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This appliance is intended for domestic or
similar applications, such as
- in shops, offi ces and other similar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
13
∙ This product complies with all binding CE
labelling directives.
Grill assembly
The barbecue grills are available in different
confi gurations.
When assembling the grill, always refer to
the diagram for your particular grill model.
Follow the steps below:
∙ Place the grill pan inside the plastic
housing.
∙ Place the heating element into the grill
pan.
∙ Fit the grill plate on top.
∙ If required, additional accessories may be
fi tted according to the diagram for your
particular grill model.
Grill models with additional base stand:
Assemble the base stand according to the
schematic diagram. Place the grill onto the
stand in such a way that the small feet under
the grill connect in the top of the vertical legs
of the base stand; ensure that the grill and
base stand are placed in a safe and stable
position.
The power cord should be routed in such a
way that no one is likely to trip over it.
Heating element
The junction box contains a safety switch.
Place the grill pan into the plastic housing
fi rst, and then fi t the heating element inside
the grill pan and housing. The safety switch
is activated automatically when the heating
element has been properly fi tted. If not fi tted
correctly, the appliance can not be switched
on.
Before using for the fi rst time
∙ Remove any packaging materials from