Sony FA-EBA1 Manual De Instrucciones página 5

Using this unit with the flash
This External Battery Adaptor is
made especially for the flash with
a DC IN terminal.
Before use, make sure that your
flash is compatible with this unit.
1
Turn off the power to the
flash and remove the
terminal cap.
2
Grasp the plug of the
connecting cord and plug the
cord to the DC IN terminal on
the flash.
• For the flash product models
compatible with this unit, visit
the Sony website in your area.
3
Turn on the power to the
flash.
• Keep the batteries in the
battery chamber of the flash.
(The flash needs its own
batteries for operation.)
4
When the TEST button on
the back of the flash lights
in orange to indicate that
the flash is ready to fire,
take a photo.
• The charge lamp on this
unit lights while the flash is
charging up itself.
• If the flash fires in quick
succession for a short period
of time, its built-in safety unit
will be triggered to suspend
flash firing and the flash stops
charging up itself (overheat).
On this unit, the charge lamp
will blink.
In such a case, be sure to
remove this unit from the
flash and leave this unit
unused for about 10 minutes
to let it cool down.
• For details of the using of
flash, refer to the operating
instructions supplied with
your flash.
You can attach a strap to the strap
hole on this unit.
GB
GB
5