Fender DELUXE REVERB-AMP Manual De Instrucciones página 8

1968 was a transitional year for Fender amps, with tone that
was still pure Fender but a look that was brand new. With a
silver-and-turquoise front panel and classy aluminum "drip
edge" grille cloth trim, the Deluxe Reverb received a fresh
new face as it remained the ideal recording and performing
amp. Small, light and moderately powered, it produced big
tube tone, with world-class Fender reverb and vibrato effects.
For countless guitarists ever since, the Deluxe Reverb has
been the go-to amp for classic Fender sound.
The '68 Custom Deluxe Reverb Amp pays tribute to the classic
look, sound and performance of Fender's late-'60s "silverface"
amps. In a special twist, both channels boast reverb and
tremolo, and the "custom" channel has a modified Bassman®
tone stack that gives modern players greater tonal flexibility
with pedals. The amp also features quicker gain onset and
reduced negative feedback for greater touch sensitivity. The
'68 Custom Deluxe Reverb's single 12" Celestion® G12V-70
speaker also delivers a more distinctively rock 'n' roll flavor.
PRODUCT REGISTRATION — Please visit:
CUSTOM CHANNEL
A. INPUT 1 — Full sensitivity input for most guitars.
B. INPUT 2 — Lower sensitivity input (-6dB) to provide high-
output guitars with cleaner response.
♫
Both INPUT 1 and INPUT 2 become equal in sensitivity when
used simultaneously.
C. VOLUME — Adjusts the loudness of the amplifier.
D. TREBLE — Adjusts high–frequency tone character.
E. BASS — Adjusts low–frequency tone character.
VINTAGE CHANNEL
F. INPUT 1 — Full sensitivity input for most guitars.
G. INPUT 2 — Lower sensitivity input (-6dB) to provide high-
output guitars with cleaner response.
♫
Both INPUT 1 and INPUT 2 become equal in sensitivity when
used simultaneously.
8
www.fender.com/product-registration
Features:
• Modified Deluxe Reverb all-tube circuitry
• Shared reverb and tremolo on both channels
• "Vintage" channel for traditional silverface operation
• Modified "custom" channel with Bassman tone stack
• Reduced negative feedback for greater touch sensitivity
• Two 6V6 output tubes
• Four 12AX7 preamp tubes and two 12AT7 preamp tubes
• Single 5AR4 rectifier tube
• Hand-wired tube sockets
• Custom-made Schumacher transformers (like the originals)
• 22 watts output power
• 12" Celestion® G12V-70 speaker for crunchy rock 'n' roll
tones
• Genuine Fender tube-driven spring reverb
• Genuine Fender tube-driven tremolo ("vibrato")
• 1968-style Silverface aluminum trim around silver-turquiose
grille cloth
• Vintage-style two-button reverb/vibrato foot switch
• Fitted cover
• Five-year warranty (United States and Canada; other ter-
ritories may vary)
H. VOLUME — Adjusts the loudness of the amplifier.
I. TREBLE — Adjusts high–frequency tone character.
J. BASS — Adjusts low–frequency tone character.
BOTH CHANNELS
♫
Reverb and Vibrato affect both the CUSTOM and the
VINTAGE channels.
K. REVERB — Adjusts the level of the Reverb effect. Reverb can
be switched on/off from the FOOT SWITCH {U}.
L. SPEED — Adjusts the rate of the Vibrato effect. Vibrato can
only be switched on/off from the FOOT SWITCH {U}.
♫
The included foot switch {U} must be connected to use the
Vibrato effect.
M. INTENSITY — Adjusts the depth of the Vibrato effect.
N. POWER INDICATOR — Illuminates when power is switched
on to the amplifier.