BRAND Dispensette S Trace Analysis Instrucciones De Manejo página 33

3.
Mounting and
aligning the instru-
ment on a bottle
Note:
For bottles with other thread sizes, select a suitable adapter. The
adapters supplied with the instrument are made of ETFE and PTFE.
4.
Transporting the
instrument
Screw the instrument (GL 45 thread)
onto the reagent bottle and then align
the discharge tube with the bottle label
by turning the valve block (Fig. 3). To
prevent tipping over use a bottle stand
for small bottles (page 46).
When mounted to a reagent bottle,
always carry the instrument as shown in
the figure (Fig. 4)!
Warning:
Always wear protective gloves when
touching the instrument or the bottle,
especially when using dangerous liquids
(e.g. HF).
First Steps
3
4
33