Use Your Product; Set Clock; Auto Standby; Adjust The Volume - Philips Fidelio SkyQuake B8 Manual Del Usuario

4 Use your
product
This section helps you use this product
to play media from a wide range of
sources.
Before you start
•
Make the necessary connections
described in Quick start guide and
User manual.
•
Switch this product to the correct
source for the other devices.

Set clock

Through clock setting, you may select a
type of standby (ECO standby without
clock display, or normal standby with
clock display ).
1
Switch this product to standby
(press ).
» --:-- (or clock) is displayed.
2
Press and hold
clock setting mode.
» --:-- blinks.
3
Press Volume +/- to select 12 hour
or 24 hour format, then press
confirm.
•
If 12 hour format is selected, then
select AM or PM for display.
» The hour digits begin to blink.
4
Press Volume +/- to set the hour,
then press
» The minute digits begin to blink.
5
Press Volume +/- to set the minute,
then press
» ECO begins to blink.
6
Press Volume +/- to select "ECO" or
"CLOCK", then press
EN
12
to activate the
to confirm.
to confirm.
to confirm.
» If you select "ECO" , in standby,
» If you select "CLOCK", in
View clock
1
In ECO standby or operation mode,
press
» In ECO standby mode, the clock
» In operation mode, the clock is
Note
•
If AC power is disconnected, the clock time
can only be retained for 24 hours.
•
Extreme room temperature affects clock
accuracy.

Auto standby

When playing media from a connected
to
device, this product automatically
switches to standby after 15 minutes of
button inactivity and no audio/video
play from a connected device.

Adjust the volume

1
Press Volume +/- to increase or
decrease a volume level.
•
•
the clock is displayed for
1 minute then the display is
switched off.
standby, the clock is always
displayed.
.
is displayed for 1 minute, then
the display is switched off.
displayed 5 seconds, then the
display is switched to the current
source information.
To mute sound, press .
To restore the sound, press
again or press Volume +/-.