Safety - Sonel CMM-10 Manual De Uso

Before using the instrument acquaint yourself with the pre-
sent manual and observe the safety regulations and recom-
mendations specified by the manufacturer.
In order to guarantee proper operation and correctness of the
obtained results it is necessary to observe the following recommen-
dations:

Before commencing operation of the meter please acquaint
yourself thoroughly with the present manual,

The instrument should be operated solely by properly qualified
personnel, who also must be trained regarding the industrial
safety regulations,

Use great care when making measurements if the voltages are
greater than 30 V AC rms or 60 V DC. These voltages are con-
sidered a shock hazard,

Do not exceed the maximum allowable input range of any func-
tion,

Never ground yourself when taking electrical measurements.
Do not touch exposed metal pipes, outlets, fixtures, etc., which
might be at ground potential. Keep your body isolated from
ground by using dry clothing, rubber shoes, rubber mats, or any
approved insulating material,

Turn off power to the circuit under test before cutting, unsolder-
ing, or breaking the circuit. Small amounts of current can be
dangerous,

When using the probes, keep your fingers behind the finger
guards on the probes,

If "OL" appears in the display during a measurement, the value
exceeds the range you have selected. Change to a higher ran-
ge,

It is prohibited to operated the meter:
 If it is damaged and completely or partially out of order,
 If the insulation of the test leads has been damaged,
WARNING:
2

Safety

CMM-10 – USER MANUAL
35