Storage; Dismantling And Utilization; Technical Data - Sonel CMM-10 Manual De Uso

In the case of storage of the device, the following recommenda-
tions must be observed:

Disconnect all the test leads from the meter,

Make sure the meter and its accessories are dry,

In the case the meter is to be stored for a prolonged period of
time, the battery must be removed from the device.

12 Dismantling and utilization

Worn-out electric and electronic equipment should be gathered
selectively, i.e. it must not be placed with waste of another kind.
Worn-out electronic equipment should be sent to a collection
point in accordance with the law of worn-out electric and electronic
equipment.
Before the equipment is sent to a collection point, do not dis-
mantle any elements.
Observe the local regulations concerning disposal of packages,
worn-out batteries and accumulators.

"m.v." means measured value of standard
DC voltage measurement
Range
400,0 mV
4,000 V
40,00 V
400,0 V
600 V

Input impedance: 7,8 M
52

11 Storage

13 Technical data

Resolution
0,1 mV
0,001 V
0,01 V
0,1 V
1 V
CMM-10 – USER MANUAL
Basic uncertainty
 (0,5% m.v. + 2 digits)
 (1,2% m.v. + 2 digits)
 (1,5% m.v. + 2 digits)