Motor - Arbortech AS170 Manual De Instrucciones

Fig.10
E
N
G
"Hammering!"
Fig.11
"Hammering!"
Fig.12
When using the Mortar Plunge blades, the cut
should have enough clearance on each end (shown
in fig:12), to ensure that no hammering of the blade
ends occurs (as shown in fig.13).
ENGLISH 9
Clearance
each end
Fig.13
"Hammering!"
7. MAINTENANCE
WARNING: To reduce the risk of serious
personal injury, turn the tool off and disconnect
tool from the power source before making any
adjustments or removing/installing attachments
or accessories.
Before reconnecting the tool, depress and release
the trigger switch to ensure that the tool is turned off.
To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including
brush inspection and replacement) should be
performed by an ARBORTECH authorised service
center. Always use identical replacement parts.

7.1 Motor

Cleaning
CAUTION: Blowing dust and grit out of the
motor and switch actuator using clean,
dry compressed air is a necessary regular
maintenance procedure. Dust and grit particles
often accumulate on interior surfaces and can
cause premature failure. Not regularly cleaning
the AS170 will affect the tools warranty.
CAUTION: ALWAYS WEAR SAFETY GLASSES
when using or cleaning this tool.
Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. Use a
clean, dry cloth only.
Lubrication
ARBORTECH tools are properly lubricated at the
factory and are ready for use.
Accessories