Following is explained how to assemble your sprayer, read carefully the text. The number at the beginning of the line corresponds to the
graphic.
1. Take out all the parts from the box and from the tank.
2. Place the sprayer vertically on a table, place the pump holder nut, gasket and felt ring on the central opening. Oil the piston sleeve and the
pump tube, insert it in the pump tube guide; carefully directing the piston sleeve to avoid any damage.Tighten the pump holder nut. Place the agitator.
3. Place the strainer and the tank lid on the tank opening.
4. Insert the pump lever behind the back rest and fix it with the pin and washers.
5. Place the pump handle on the shaft, fix it with a lock pin.
6. Finally tighten the spray gun and tube and then tighten the adjustable nozzle.
2
20.5"/52 cm brass
Brass adjustable
0.16.6 US gal / 630 ml
H 57 cm x L37 cm x W 22 cm - 22 7/16" x 14 9/16" x 8 11/16"