SEVERIN BR 7946 Instrucciones De Uso página 9

applications.
●
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel. If repairs are
needed, please send the appliance to one
of our customer service departments.
The address can be found in the
appendix to this manual.
Before using for the first time
- Remove the appliance from its
packaging.
- Remove any exterior and interior
packaging materials and make sure that
the dust container, filter guard and both
Hepa-filters are correctly fitted.
Thermal safety cut-out
This vacuum cleaner is equipped with an
integral thermal safety cut-out, which
automatically switches the appliance off in
case of overheating (e.g. due to blockage in
the tube, dust container or filters). Should
this occur, remove the plug from the wall
socket and let the appliance cool down for a
minimum of one hour. The vacuum cleaner
may then be used again after the blockage
has been removed.
Operation
- Put the vacuum cleaner in its horizontal
operating position.
- Insert the hose into the hose connection.
- Connect the tube to the hose grip.
- Attach any of the nozzles provided to the
end of the tube. If the full tube length is
not required (e.g. when using the crevice
tool), the nozzle may be attached directly
to the hose grip.
- Pull out the power cord from its storage
to the necessary length (but not beyond
the red mark) and insert the plug into a
suitable wall socket.
- The vacuum cleaner is equipped with a
very powerful motor. In order to prevent
a fuse within your home electrical
installation from being triggered when it
is switched on, always set the power
regulator to its lowest setting before the
appliance is activated.
- The electronic suction regulator allows
the suction power to be variably adjusted
to your needs.
- In addition, the suction power can be
decreased further by opening the
secondary air-flow opening slide in the
hose grip.
- Always start with a low setting when
cleaning soft objects such as curtains.
●
Always ensure that the power cord is not
routed around or runs over corners or
edges, and that it cannot be jammed in a
door.
- During operation, the hose may be used
to pull the unit along behind you.
However, when carrying the unit, always
use the carrying handle.
●
To prevent the power cord from being
pulled with excessive force, always
change to the next suitable wall socket
when cleaning larger areas.
- Switch off the appliance after use and
remove the plug from the wall socket.
- To retract the power cord automatically
into its storage, use your hand or foot to
press down the (folded) handle which
activates the retraction mechanism.
Accessories
The crevice tool and dual-purpose
attachment are located on the accessory
holder.
Multi-purpose tool
The multi-purpose tool is especially suitable
for cleaning large areas. It can be adjusted
for use on tile floors or carpeted floors by
means of the lever on the attachment top.
Crevice tool
The crevice tool is designed to clean difficult-
to-reach areas such as grooves, niches,
corners and crevices.
The crevice tool can be folded out of the
accessory holder; simply pull the tool out of
6