asalvo TRIO GENIUS 16850 Manual De Instrucciones página 29

ASSEMBLE THE CARRYCOT
In order to unfold the pram body, remove the bedding and the mattress,
and then squeeze the metal tensioners on the bottom plate of the pram
body in the direction of the arrows, until it locks in special holders. You
should hear a "click"sounds locking the tensioner in the holder
NOTE! The pram body is designed for children up to 6 months old weighing
up to 9 kg, which cannot sit, kneel or trundle by themselves. Stop using
the stroller body if your child starts sitting kneeling or trundling by itself
WARING: Do not use an additional mattress of thickness of more than
15mm.
The pram body canopy has 4-step adjustment. In order to adjust it, press
simultaneously the buttons located at the base of the carrying handle
and adjust the desire position. The external canopy rant is also a carrying
handle. In order to move the stroller body by holding the handle, place it
in the top position
NOTE! Make sure that the carrying handle is locked in the correct position
before you move the pram body
NOTE! The pram body can be assembled only back to the direction of
travel( in this setting, the person pushing the pram is face to face with a
child)
29
NOTE! Lock the safety brake before you assembly the pram body on the
stroller frame
In order to assembly the pram body on the stroller frame, removed the
bumper from the stroller ,then removed the seat , then insert the universal
adapters on the frame and assemble the pram, You should hear a click.
NOTE! Before using, make sure that the stroller body is properly assembled