Warranty; Maintenance; Storage And Transportation Conditions; Use Conditions - Compex One Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 116

Warranty

EN
See the enclosed leaflet.

Maintenance

Clean with a soft cloth and an alcohol based, solvent-free cleaning product. Use only a
minimum amount of liquid when cleaning the unit. Do not disassemble the stimulator
or charger as all these contain high voltage components that could cause electric
shock. This may only be done by persons or repair services authorized by Compex. Your
stimulator does not require calibration. If your stimulator contains parts that seem worn
or defective, please contact your nearest Compex customer service centre.

Storage and transportation conditions

The stimulator must be stored and transported in accordance with the following
conditions:
Temperature: - 20° C to 45° C
Maximum relative humidity: 75 %
Atmospheric pressure: 700 hPa to 1060 hPa

Use conditions

Temperature: 0° C to 40° C
Relative humidity: 30 % to 75 %
Atmospheric pressure: 700 hPa to 1060 hPa
Do not use in areas where there is a risk of explosion.

Elimination

Battery must be disposed in compliance with relevant national regulatory
requirements. Any products bearing the WEEE marking (a crossed-out wheeled bin)
must be separated from ordinary household waste and sent to special collection
facilities for recycling and recovery.

Standards

To guarantee your safety, the stimulator has been designed and manufactured in
compliance with the requirements of the European Medical Device Directive 93/42/EEC
as amended.
The One stimulator also complies with the general safety standard for electromedical
equipments, EN 60601- 1. It also complies with the electromagnetic compatibility
standard, EN 60601-1-2 and the standard on particular safety requirements for nerve
and muscle stimulators, EN 60601-2-10.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido