Changing The Power Illuminator; Viewing Information About The Disc In The Display; Checking The Remaining Time - Sony MHC-GN880 Manual De Instrucciones

Changing the power
illuminator
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 t PATTERN 2 t
PATTERN 3 t PATTERN 4 t
PATTERN OFF (No display)
Notes
• When you turn VOLUME (or press VOLUME +/–
on the remote), power illuminator shows the current
volume level.
• During the demonstration display, you can turn on or
off power illuminator by pressing ILLUMINATION.
Viewing information
about the disc in the
display
You can check the playing time and remaining
time of the current track or that of the disc.
When a CD-TEXT disc or a disc with MP3
audio tracks is loaded, you can also check the
information recorded on disc, such as the titles.
When the system detects CD-TEXT discs,
"CD TEXT" lights up in the display.

Checking the remaining time

Press DISPLAY repeatedly during
playback.
Each time you press the button, the display
changes cyclically as follows:
Playing time of the current track t Remaining
time of the current track
2)
the current disc t Title of the current track
t Title of the current album (for a few
4)
t Clock display (for 8 seconds) t
seconds)
Effect status (for 8 seconds)
1)
"--.--" appears while an MP3 audio track is played
back.
2)
"--.--" appears in the following cases:
– while MP3 audio tracks are played back.
– All play modes except "1DISC" or "ALBM".
3)
Only for CD-TEXT disc and a disc with MP3 audio
tracks.
When the CD-TEXT disc contains more than 20
tracks, the current track title is not displayed from
track 21 onwards.
4)
Only for a disc with MP3 audio tracks.
1)
t Remaining time of
3)
continued
GB
31