Time Setting; Screen Lock - Vermeiren LiNX 400 Manual De Instrucciones

EN
NL
 To navigate to one of the items in the pop-up screen, tap on the item.
 To navigate to the previous screen, tap the return arrow.
 To close the pop-up screen, tap on the cross key (M) at the bottom of the screen.
 When a selection key is active, the indicator of the key turns green.

4.5.1 Time setting

 Tap on the time indication (H in previous figure) and set hour
and minutes by tapping the arrows (I).
 To switch from 12-hour dial to 24-hour dial, tap in the area of
the 12/24-hour button (J).

4.5.2 Screen lock

The Screen lock key (L) (see Figure 6) is primarily intended to restrict the authorisation of
the screen operation to the occupant, but also prevents unintentional use of screen
controls.
The screen lock does not influence the driving functions or body-positioning
functions. When the screen is locked, the maximum drive speed is set according to
submenu D1.This pop-up screen can also be opened/closed by pressing submenu
button II (3) for2 seconds.
 To lock the
Tap and hold your finger on the settings button (K) for 7 seconds (see Figure 6).
o
To switch the lock ON, tap the selection key of the "screen lock" section. The
o
indicator turns green.
When the screen is locked, all operating keys are greyed out
and become inoperable.
The symbol of the settings button (K) turns into a padlock.
 To unlock the screen:
Switch off the operating console with the ON/OFF button
o
to lift the lock.
The keys on the screen become operable again.
screen:
10
LiNX 400
2019-01
Operating console functions
I
J
Time setting
D1
Screen locked
K