Especificaciones Técnicas - Solidyne D-816 Manual Del Usuario

Consola compacta para radiodifusión
Tabla de contenido

Publicidad

6.2 Especificaciones técnicas
Audio inputs
3 balanced MIC inputs (XLR)
3 balanced stereo Line inputs (DIN 5)
4 unbalanced stereo Line inputs (RCA)
2 Digital stereo Line inputs (USB)
Input levels / Impedance
Balanced MIC= -10 dBu/-75 dBu; 150/250 Ohms
Balanced LINE = -20 dBu/+26 dBu; 600~ 10Kohms
Unbalanced LINE = -15 dBu/+12 dBu; 600~ 10Kohms
Digital: standard USB levels
Phantom power
All the MIC inputs have 48 V phantom power supply, switchable
ON / OFF
Analog outputs
2 bus stereo outputs; PGM & REC, balanced + 4 dBm;
Max Level +28dBu (10K), +20dBm (600 ohms)
External Hybrid: unbalanced + 4 dBu
Digital Input/Output levels
It uses the K-12 recommendation for broadcasting; Then, 0 VU is
at -12 dB Full Scale level
Monitor & Hybrid Outputs
1 Stereo Studio, 1 v rms for active speakers, muted
1 Stereo Control, 1 v rms for active speakers, muted
1 Stereo Studio Headphones, with Distribution AMP up to 8 head-
phones, + 10 dBu
1 Stereo Control Headphones, + 10 dBu
1 External Hybrid send (MIX-Minus) +4 dBu / 10K
Cue monitor
Internal CUE Monitor Amplifier; 250 mW
Headroom
24 dB @ LIN to PGM Ref + 4dBu/10 k
Start external devices
From MIC-1 & MIC-2
From Line 5 & 6
Open collector +24V @ 0,1 A
Frequency response
20-20.000 Hz +/- 0.5 dB (LIN to PGM)
Mic equalizer
Four Bands MIC EQ with In/Out switch; 80 Hz top flat curve, 160
Hz bell shaped, 4 kHz bell shaped, 8 kHz top flat
Action + 15 dB / -15 dB
Mic compressor
Low distortion MIC compressor with In/Out switch. 20 dB max com-
pression. Attack time < 10 ms. Threshold = 0 VU
Compression ratio: < 2 dB variation for 15 dB change MIC level
Noise
MIC input, EIN=-120 dBu/150 ohms
LINE input, S/N > 70 dBA
Dinamic range
From Line to PGM > 90 dBA (CD quality)
Crosstalk
PGM-REC > 65 dBA @ 1 kHz
Distortion
From LINE to PGM out < 0.03 % THD @30-15.000 Hz.
Phase
From Line to PGM, < 3º L&R @50-10.000 Hz
Stereo tracking
Below 0.2 dB error L/R in fader range 0 to 40 dB
Telephonic hybrid
TWO line active Hybrid
It includes a mini-PBX with blue LED silent ringer, Line attention with
free hands operation, and Line Transfer
Frequency Response: 300 - 3.400 Hz
Noise: > 60 dBA S/N
Rejection: > 40 dB rejection
Rejection adjust in front panel preset
Preference attenuator: 12 dB local speaker interrupt priority
Automatic On-Air logic: Audio & Logic are managed from a single
100mm slide fader that performs all the operations in error-free
mode (CUE, private hands free Talk - Hold with Air return - Live On
Air)
Telephone input lightning discharge safety
Telephone Hybrid inputs are transformer floating to meet the Public
Telephone service isolation standards. They are protected with
SIOV Varistors against soft lightning discharges.
Talkback
Included Talkback MIC, with Audio Limiter. Noise Cancelled PZM
type. Outputs to Phone Line Hybrid or Studio Speakers & Head-
phones.
VU-meters
4 electronic VU-meters for PGM & REC. Cuasi-peak reading, with
standard yellow VU scale.
Microphone compressor indicator 0 - 15 dB
Tally Light
ON-AIR signal output (turns on when MIC is open).
Tubular connector 2.1 mm (internal pin).
12 V CC @ 0,12 amp (two Solidyne On-Air lights)
Power
Tubular connector 1.8 mm (internal pin).
Switching external power supply 90-240 V, 20VA [28V@0,57A]
Dimensions & Weight
350 (D) x 550 x 130 mm 7 Kg shipment weight

Publicidad

Tabla de contenido
loading

Tabla de contenido