Phonic PAA6 Manual Del Usuario página 7

13
11
10
7. Balanced XLR Inputs
These balanced inputs allow users to feed
signals from external devices into the PAA6 to
take various readings in any number of different
functions. To use the XLR inputs as your input
source, select "Line in" as the function's primary
input source.
8. Balanced XLR Output
This connector is for sending a balanced signal
from the internal tone generator to external
devices. The level of the output signal is deter-
mined by the tone generator software.
9. SD Memory Card Slot
Insert an appropriate SD memory card into this
slot to save your readings.
10. USB Connector
Connecting the PAA6 to your computer through
this USB connector will allow users to upload
and download saved readings to and from the
PAA6 or any SD card inserted into the PAA6's
SD card slot. Real time operation will also
possible through a future online update, so
please check www.phonic.com for information
on software updates.
PAA6
11. DC Power Input
Connect the included DC power supply here to
recharge the built-in battery. The DC power sup-
ply can also be used to operate the unit without
wasting the battery life.
12. Stand Mount
A stand mount is located on the rear of the PAA6.
This allows for connection to a tripod or any other
stand that has a standard #6 - 20 connecting
screw. These are often found on camera tripods.
Also included with the PAA6 is a stand adapter,
allowing the unit to be mounted on microphone
stands as well.
13. Touch Pen
The PAA6's touch pen can be found in this slot.
Replace the pen into the slot when it is not being
used to ensure you do not lose it.
12
9
3