Phonic PAA6 Manual Del Usuario página 9

1
2
7. Channel Icons – These two small boxes
indicates the currently active input channels
(MIC1 and MIC2 or Line1 and Line2). Touching
either of these boxes will activate and deactivate
that channel.
8. Properties Windows – This small window
will display properties of the incoming signal,
typically the currently selected frequency band's
level (whether in dB SPL, dBu, dBV or Volt), the
frequency of those peaks and the unit currently
being measured. Depending on the function, the
results shown here may differ slightly.
9. SET Icon – Found on all functions, the SET
icon will allow users to directly adjust the ap-
propriate parameters of their currently selected
operation.
PAA6
3
6
4 5
14
10. FILE Icon – Users can select this icon to
load, save or delete any of their readings. Read-
ings can be saved to either the PAA6 itself or an
external SD card and are saved as *.txt files.
11. Run/Stop Icon – When this icon is red and
the stick-figure within seems to be standing still,
the current function is not active. Push the icon
to activate the function. The icon will turn green
and the stick figure will appear to be running.
This button works along-side the RUN/STOP
button found on the left-hand side of the PAA6.
12. Signal Generator On/Off Icon – Push this
icon to turn the onboard signal generator on and
off. When the signal generator is off, the icon will
be red. When it is on, the icon will be green. This
button works concurrently with the S.G. Button
on the left-hand side of PAA6.
9
11
15
7
8
10
12
13
5