Fitting The Harness; Shoulder Strap; Balancing The Machine - Stihl KW Manual De Instrucciones

Fitting the Harness*

Shoulder Strap

: Put on the shoulder strap (1).
: Adjust length of strap until the spring
hook (2) is about a hand's width
below your right hip.
: Balance the PowerSweep –
see "Balancing the Machine".
* See "Guide to Using this Manual"
KW

Balancing the Machine

2
1
2
Attaching Machine to Harness*
: Attach the spring hook (1) to the
clamp* (2).
* See "Guide to Using this Manual"
1
3
: Loosen the screw (3).
Balancing the Machine
: Slide the clamp up or down the drive
tube so that the sweeper belts touch
the ground.
: Tighten the screw firmly.
English / USA
15